Same product family

Huawei
RRU5515t
What it does: RF transmission / reception. Operating RF bands / ranges: 700, 800 and 900 MHz (Bands 28/n28, 20/n20 and 8/n8).
1 part number: 02312TPD
Viewing: model overview
Request a QuoteRequest current availability, condition and pricing. Delivery terms are agreed in the quotation.
Main specifications
Technologies700 and 800 MHz: LTE FDD/LTE NB-IoT/NR FDD with NR SUL; 900 MHz: GSM/UMTS/LTE FDD/LTE NB-IoT/NR FDD
Operating RF bands / ranges700, 800 and 900 MHz (Bands 28/n28, 20/n20 and 8/n8)
Browse: n28 · n20 · n8
Browse: n28 · n20 · n8
Uplink frequency700 MHz 703–733; 800 MHz 832–862; 900 MHz 880–915 MHz
Downlink frequency700 MHz 758–788; 800 MHz 791–821; 900 MHz 925–960 MHz
TX / RX modes2T2R on 700, 800 and 900 MHz
RF output powerSingle 700/800/900 band and 700+800: 2 × 80 W. 700+900, 800+900 and 700+800+900: 2 × 120 W; per RF channel each single band ≤80 W, 700+800 combined ≤80 W, and combinations including 900 ≤120 W
Interfaces / connectorsV100R017C10; physical layout from (2020-03-31): 2 × 4.3-10 female TX/RX RF; 2 × SFP female CPRI; 1 × DB9 female RET; male fast −48 V DC power connector; ALD port capability: ANT_A: RET/TMA; ANT_B: TMA; RET port: RET
Interfaces and data ratesV100R017C10; physical layout from (2020-03-31): 2 × CPRI at 1.25/2.5/4.9/9.8 Gbit/s; CPRI0 connects to BBU or upper-level RRU, CPRI1 to lower-level RRU or BBU; maximum cascade level 6 for GSM/UMTS and 4 for LTE FDD/NB-IoT/NR; 20–40 km maximum BBU distance depending on RAT/baseband; RET control via DB9; RET antenna control supports AISG 1.1/2.0/3.0; 12 V feeding voltage; 2.3 A feeding current
Power supply−48 V DC input (operating −36…−57 V DC); typical consumption 500 W at 25 °C and 50% traffic load (±10%)
FamilyHuawei RRU
Installation environmentV100R017C10; physical layout from (2020-03-31): Blade RRU; IFS06/IFS5906 indoor floor support, OFP06 outdoor pole/tower/building-top support or RFC5906 cabinet; operating −40…+55 °C without solar radiation or −40…+50 °C with 1120 W/m² solar radiation
IP ratingIP65
Additional technical information
- Dimensions
- 480 × 356 × 140 mm (24 L)
- Weight
- 25 kg excluding mounting kits
- Bandwidth
- IBW: 700 MHz 30 MHz, 800 MHz 30 MHz, 900 MHz 35 MHz; LTE FDD 5/10/15/20 MHz; NR FDD 5/10/15/20 MHz; NR SUL 10 MHz
- Capacity
- GSM 8 carriers; UMTS 7 without MIMO or 4 with MIMO; LTE FDD and NR FDD 2 carriers on one band, 4 across two or 6 across all three; LTE NB-IoT 8 enabled/1 disabled for one band or 700+800, and 16 enabled/2 disabled for pairs including 900 or all three bands; NR SUL 1
- Synchronization
- In mode CPRI: clock signal recovery from the incoming line; frame synchronization from REC
- Chassis
- Remote-radio enclosure/form factor; documented dimensions: 480 × 356 × 140 mm (24 L); ingress protection: IP65
- Modules
- Integrated high-speed-interface, signal-processing, power-amplifier, duplexer, extension-port, and power-module sections
- Functional role
- V100R017C10; physical layout from (2020-03-31): DC blade remote radio unit for Huawei SRAN base stations
- Architecture
- V100R017C10; physical layout from (2020-03-31): High-speed interface, signal-processing, power-amplifier, duplexer, extension-port and power-module sections; two shared TX/RX channels across the supported bands
- Subtype
- Tri-band 700+800+900 MHz 2T2R RRU
- Details
- PIM cancellation gain up to 15 dB; operating 5–100% RH, 1–30 g/m³ absolute humidity and 70–106 kPa; DC power-port surge current 20 kA
- Connection notes
- BBU / upstream or downstream RRU; antenna; RET RCU
Related equipment
Same product family
Huawei RRU5513t
Same product family
Huawei RRU5516
Same product family
Huawei RRU5865
Same product family
Huawei RRU5866
Same product family