BBU–RRU
EN
Huawei radio category illustration
Illustration
Huawei

RRU5516

What it does: RF transmission / reception. Operating RF bands / ranges: WD5MBW5516GB: 1800 and 2100 MHz; WD5MRU5516S2/WD5M795516S1: 700 and 900 MHz; V100R020C10 850 and 900 MHz.

1 part number: 02313ZTQ

Viewing: model overview

Request a Quote

Request current availability, condition and pricing. Delivery terms are agreed in the quotation.

Main specifications

TechnologiesWD5MBW5516GB: 1800 LTE/NR FDD and 2100 UMTS/LTE/NR FDD; WD5MRU5516S2 and WD5M795516S1: 700 LTE/NR FDD and 900 GSM/UMTS/LTE/NR FDD; V100R020C10 850+900 variant: 850 UMTS/LTE FDD/NR FDD and 900 GSM/UMTS/LTE FDD/NR FDD
Operating RF bands / rangesWD5MBW5516GB: 1800 and 2100 MHz; WD5MRU5516S2/WD5M795516S1: 700 and 900 MHz; V100R020C10 850 and 900 MHz
Uplink frequencyWD5MBW5516GB: 1710–1785 and 1920–1980 MHz; WD5MRU5516S2: 703–748 and 890–915 MHz; WD5M795516S1: 703–748 and 880–915 MHz; V100R020C10 850+900 variant: 824–835 and 890–915 MHz
Downlink frequencyWD5MBW5516GB: 1805–1880 and 2110–2170 MHz; WD5MRU5516S2: 758–803 and 935–960 MHz; WD5M795516S1: 758–803 and 925–960 MHz; V100R020C10 850+900 variant: 869–880 and 935–960 MHz
TX / RX modesWD5MBW5516GB/WD5MRU5516S2/WD5M795516S1: 4T4R; V100R020C10 850+900 variant: 4T4R per band, or maximum 2T2R per band when RX and TX use separate ports
RF output powerWD5MBW5516GB: maximum 4 × 120 W; WD5MRU5516S2 and WD5M795516S1: 4 × 100 W per band, 4 × 120 W for 700+900 MHz; V100R020C10 850+900 variant: maximum 4 × 120 W at 850, 900, or 850+900 MHz
Interfaces / connectorsV100R020C10 850+900 variant: 2 × CPRI ports and −48 V DC power port
Interfaces and data ratesV100R020C10 850+900 variant: 2 × CPRI at 2.5/4.9/9.8/10.1/24.3 Gbit/s; cascade level 6 for GSM/UMTS and 4 for LTE FDD/NB-IoT/NR FDD; BBU distance 20–40 km depending on RAT/baseband
Power supplyV100R020C10 850+900 variant: −48 V DC input (operating −36…−57 V DC); typical consumption 850 W at 25 °C and 50% traffic load (±10%)
FamilyHuawei RRU
Installation environmentV100R020C10 850+900 variant: outdoor; −40…+55 °C without sunlight or −40…+50 °C at 1120 W/m² solar load; 5–100% RH; altitude ≤4000 m
IP ratingV100R020C10 850+900 variant: IP65
Additional technical information
Dimensions
V100R020C10 850+900 variant: 480 × 356 × 170 mm (29 L)
Weight
V100R020C10 850+900 variant: 28 kg excluding mounting kits
Bandwidth
Low-band variants in Huawei selection guide: IBW 700 MHz 45 MHz, 800 MHz 30 MHz, 900 MHz 35 MHz; a P900 variant is listed with 25 MHz. V100R020C10 850+900 variant: IBW 850 MHz 11 MHz and 900 MHz 25 MHz when no PIM3 products fall in RX; LTE FDD/NR FDD carrier bandwidths 5/10/15/20 MHz
Capacity
V100R020C10 850+900 variant: GSM 8 carriers; UMTS 4 without MIMO or 2 with MIMO; LTE FDD/NR FDD 2 carriers in one band or 4 across two bands; LTE NB-IoT 8 with multi-carrier enabled or 1 disabled
Synchronization
In mode CPRI: clock signal recovery from the incoming line; frame synchronization from REC
Chassis
Remote-radio enclosure/form factor; documented dimensions: V100R020C10 850+900 variant: 480 × 356 × 170 mm (29 L); ingress protection: V100R020C10 850+900 variant: IP65
Functional role
Outdoor remote radio unit
Architecture
V100R020C10 850+900 variant: dual-band outdoor RRU, normally 4T4R per band; when RX and TX use separate RF ports, maximum 2T2R per band (2T on A/B, 2R on C/D)
Subtype
Huawei documents distinct dual-band 4T4R RRU5516 variants: 1800+2100, 700+900, and V100R020C10 850+900
Details
V100R020C10 850+900 variant: volume 29 L; PIM-cancellation gain up to 15 dB when connected directly to the antenna through a fixed jumper ≤6 m with no intermediate combiner
Connection notes
BBU via CPRI; antenna (jumper≤6m, without intermediate combiner)

Related equipment

Compare models 0
Quote list 0

Review the model, part number and quantity for each position.