Same product family
Ericsson
RRUS 11 B5
What it does: Radio transmission / reception. Operating RF bands / ranges: B5.
2 part numbers: KRC 161 285/2 / KRC161285/2
Viewing: model overview
Request a QuoteRequest current availability, condition and pricing. Delivery terms are agreed in the quotation.
Main specifications
TechnologiesB5: C, W, L, MI; conditions: [3] ESS (Ericsson Spectrum Sharing) is a software feature. | [4] Lists support for the following standards: MI Cat-M1 (CM), MI NB-IoT in-band (IB), MI NB-IoT guard band (GB), and MI NB-IoT standalone (SA).
Uplink frequency824–849 MHz
Downlink frequency869–894 MHz
TX / RX modes2T2R
RF output power2 × 40 W; conditions: [5] Requires HWACs (not valid for RUG). | [6] For information on possible power back off or band edge loss, contact Ericsson Technical Sales Support.
Interfaces / connectors2 × 7/16 antenna TX/RX; 2 × optical SFP; −48 V DC power; ALD/RET; external alarm; RXA/RXB diversity cross-connect; dual-lug ground; LMT position is unused
Interfaces and data rates2 data port(s); cascading support: yes; different line rates on different ports: yes; CPRI line rates: 1.2, 2.5 Gbps
Power supply−48 V DC nominal, −40.0 to −57.6 V DC operating range; optional PSU AC 02 accepts 100–250 V AC, 50–60 Hz
FamilyRRUS 11
Installation environmentOutdoor near-antenna wall or pole installation; exceptional horizontal front-down mounting reduces available power-supply/output options
IP ratingIP55; North America enclosure type 3R
Additional technical information
- Dimensions
- 500 × 431 × 182 mm (H × W × D) with solar shield and handle
- Weight
- 23 kg
- Bandwidth
- B5: IBW 20 MHz; operational bandwidth 20 MHz; conditions: [7] Operational bandwidth is the actual bandwidth allocated for carriers.
- Capacity
- Without license key: one carrier; with license keys: up to four carriers
- Synchronization
- Traffic and timing signals are transported over optical interfaces 1 and 2 between RRUS 11 and the RBS main unit
- Chassis
- Self-contained RRUS 11 enclosure with solar shield and slide cover; optional PSU AC 02 mounts on the rear
- Modules
- Integrated TRX, two power amplifiers, filter unit and surge-protection devices; pluggable SFP optical modules; optional rear PSU AC 02 and optional RF monitoring port
- Functional role
- Remote FDD radio unit extending an RBS main unit through optical fronthaul and installed near the antenna
- Architecture
- Warranty-sealed integrated RRUS enclosure containing TRX, two power amplifiers, filter unit and DC/ALD/alarm surge protection; optional rear PSU AC 02 and optional RF monitoring port
- Subtype
- 2T2R RRUS 11 multi-standard FDD remote radio unit
- Details
- Normal environment −40 to +55 °C, 5–100% RH, no acoustic noise; maximum front wind load 430 N at 50 m/s. At 2 × 40 W, high-load operation is limited to −40 to +50 °C.
- Connection notes
- DU/Baseband via CPRI
Related equipment
Same product family
Ericsson RRUS 11 B2
Same product family
Ericsson RRUS 11 B4
Same product family
Ericsson RRUS 11 B7
Same product family
Ericsson RRUS 11 B12
Same product family