Target part number(s): 02311VFF
Interface / role: Backplane host, power and cooling
Conditions: Slot, board generation and software release must match
03057389
Huawei UMPTb3 03057389. Control / Transmission Board for the UMPT Control / Transmission Boards. Function: Plug-in module, board, common/capacity unit, support unit or subrack component. Compatible host/equipment: Compatible BBU/Baseband: Huawei BBU3900/3910/5900 host matching the board generation. Compatible RRU/RRH/AAU: Connected RRU/AAU family depends on board capability, RAT and software. System modules: Host chassis, UMPT control, UBBP/WBBP/LBBP processing, UPEU/UPBA power/support. Cabinets/subracks: 19-inch rack or Huawei cabinet with suitable backplane and -48 V DC distribution. Antennas/AAU: Determined by connected radio. Required companion equipment: Compatible BBU chassis/backplane, UMPT control, UBBP/WBBP/LBBP processing as applicable, power entry/support and cooling. Slot/form factor: 19-inch or vendor-specific form factor; verify exact chassis. Interfaces: RF: No RF connectors; Fronthaul/transport: SFP/SFP+ optical GE/10GE and separate electrical GE ports; Power: through the BBU backplane; Management/synchronization: RJ45 GE/O&M/clock, USB/console and revision-dependent alarm interfaces; Other: BBU backplane connector. Power: Powered through Huawei BBU backplane. Installation: Plug-in slot, backplane or internal rack position. Verification status: Mixed / revision check; Board/module installation confirmed at host-platform level.
| Main Category | System Modules, Boards & Subracks |
|---|---|
| Equipment Subtype | Control / Transmission Board |
| Platform / Host System | UMPT Control / Transmission Boards |
| Primary Function | Plug-in module, board, common/capacity unit, support unit or subrack component. |
| Compatible Host / Equipment | Compatible BBU/Baseband: Huawei BBU3900/3910/5900 host matching the board generation. Compatible RRU/RRH/AAU: Connected RRU/AAU family depends on board capability, RAT and software. System modules: Host chassis, UMPT control, UBBP/WBBP/LBBP processing, UPEU/UPBA power/support. Cabinets/subracks: 19-inch rack or Huawei cabinet with suitable backplane and -48 V DC distribution. Antennas/AAU: Determined by connected radio. |
|---|---|
| Required Companion Equipment | Compatible BBU chassis/backplane, UMPT control, UBBP/WBBP/LBBP processing as applicable, power entry/support and cooling. |
| Related Radios / BBU | Connected RRU/AAU family depends on board capability, RAT and software |
| Compatible Cabinet / Subrack | 19-inch rack or Huawei cabinet with suitable backplane and -48 V DC distribution |
| Slot / Form Factor | 19-inch or vendor-specific form factor; verify exact chassis |
| Interfaces & Connectors | RF: No RF connectors; Fronthaul/transport: SFP/SFP+ optical GE/10GE and separate electrical GE ports; Power: through the BBU backplane; Management/synchronization: RJ45 GE/O&M/clock, USB/console and revision-dependent alarm interfaces; Other: BBU backplane connector |
|---|---|
| Transport / Optical Interfaces | SFP/SFP+ optical GE/10GE and separate electrical GE ports |
| Power Source | Powered through Huawei BBU backplane |
| Power Connector Type | Edge / backplane power connector; no external power connector on the board |
| Required Power / Internal Cable | No separate power cable is required |
| Power Consumption | Estimated maximum 70 W |
| Cooling / Thermal Role | Host subrack/chassis airflow; filler panels and slot rules apply |
|---|---|
| Installation Location | Inside host chassis/subrack |
| Mounting Method | Plug-in slot, backplane or internal rack position |
| Mounting Kit / Hardware | No separate external mounting kit; use host chassis guide rails, ejector handles, captive screws and filler panels |
| Known Mounting Kit PNs | No standalone mounting-kit PN; host chassis hardware applies |
| Fasteners / Fixings | Captive faceplate screws, board ejector handles, guide rails and slot filler panels. Do not improvise external mounting. |
| Cables & Connections | Host backplane connection; optical/Ethernet patch cord where the module exposes front ports; internal power through backplane; alarm/synchronization cable only when the specific module provides that interface |
| Dimensions | 400 × 32 × 280 mm |
| Weight | 1.5 kg net |
| Operating Temperature | -5 to +55 °C |
| Data / Compatibility Status | Mixed / revision check; Board/module installation confirmed at host-platform level |
|---|---|
| Battery / Shipping | No removable battery documented on the listed UMPT board; Inspect the board physically before air shipment if coin-cell status must be certain, especially for UMPT variants with GNSS hardware |
Each relation retains its evidence level. Family-level, platform-level and engineering-selection relations are not displayed as exact part-number compatibility.
Target part number(s): 02311VFF
Interface / role: Backplane host, power and cooling
Conditions: Slot, board generation and software release must match
Send the manufacturer, model, part number, quantity and destination country. Requests may include equipment not yet listed in the catalog.