084629A
Nokia FRGP B1 084629A. Remote radio unit for B1 (2100 MHz); 3TX / 6RX (family-level estimate); output Estimated 3 × 60 W (180 W total). Compatible baseband: Flexi System Modules ESMB, FSMD, FSME or FSMF; FBBA/FBBC capacity extension where required. Required modules and boards: FSMD/FSME/FSMF/ESMB system module; FBBA/FBBC capacity extension when required; FTIF transport where applicable; FPFD/FPFH/PFA power; FSAH alarm module; fan/cooling accessory where specified. Fronthaul: SFP optical CPRI, LC duplex through the optical transceiver. RF interface: 7/16 DIN female (typical for Flexi RFM/RRH). Power: -48 V DC outdoor/site supply through Flexi power cable. Mounting: Pole, wall, floor/plinth or Flexi rack/cabinet mounting depending on module casing. Verification status: Mixed / revision check; Exact family kits confirmed; select FPKA/FPKC by RRH form factor and revision.
| Band | B1 |
|---|---|
| Frequency | 2100 MHz |
| TX / RX Configuration | 3TX / 6RX (family-level estimate) |
| Output Power | Estimated 3 × 60 W (180 W total) |
| Supported Standards | GSM/EDGE, WCDMA/HSPA, LTE/LTE-A; exact support depends on Flexi software release |
| Compatible BBU / Baseband | Flexi System Modules ESMB, FSMD, FSME or FSMF; FBBA/FBBC capacity extension where required |
|---|---|
| Required Modules & Boards | FSMD/FSME/FSMF/ESMB system module; FBBA/FBBC capacity extension when required; FTIF transport where applicable; FPFD/FPFH/PFA power; FSAH alarm module; fan/cooling accessory where specified. |
| Compatible Cabinets / Subracks | FMFA 470149A plinth/mounting system; FCOB 473240A outdoor cabinet; compatible Nokia site cabinet |
| Compatible Passive Antenna | Passive band-matched antennas with 7/16 DIN or 4.3-10 jumpers; AISG/RET where supported |
| RF Connector Type | 7/16 DIN female (typical for Flexi RFM/RRH) |
|---|---|
| Fronthaul Interface | SFP optical CPRI, LC duplex through the optical transceiver |
| Optical Form Factor | SFP / SFP+ |
| Optical Speed | CPRI 2.5 / 5 / 10 Gbit/s |
| Optical Connector | LC duplex; outdoor LC sealing kit/cable assembly where required |
| Optical Reach | 2–80 m predefined outdoor cable assemblies or longer SMF link with matched optics |
| Known Optical Part Numbers | Known cable assemblies: FUFAS 473288A 2 m; FUFBB 473304A 50 m; FUFBY 473334A 50 m; FUFDD 473905A 80 m. Known optics examples: 4807457 and 4807528; verify exact rate/fiber. |
| AISG / RET / Control | AISG/RET circular connector; service/alarm |
| Power Supply | -48 V DC outdoor/site supply through Flexi power cable |
|---|---|
| Power Connector Type | Vendor-specific 2-pole sealed -48 V DC Nokia Flexi connector; the exact shell depends on the FR/FX/FH/FZ generation |
| Required DC Power Cable | Nokia Flexi outdoor DC power cable with a factory-installed mating plug |
| Power Consumption | Estimated maximum 430 W |
| Installation Environment | Outdoor |
| Mounting Method | Pole, wall, floor/plinth or Flexi rack/cabinet mounting depending on module casing |
| Mounting Kit / Hardware | FPKA Flexi pole kit 471649A; FPKC Flexi pole kit 472821A; FMFA floor/wall/pole mounting kit 470149A. FMFA includes fixing plates and module-casing screws. |
| Known Mounting Kit PNs | 471649A FPKA; 472821A FPKC; 470149A FMFA |
| Fasteners / Fixings | FMFA: fixing plates, M5×8 and M5×12 screws; pole kit/clamps; grounding cable. Wall installation requires anchors sized for the loaded module. |
| Cooling | Passive heat-sink cooling; model-specific fan unit may be required |
| Cables & Connections | CPRI/eCPRI optical fiber cable; -48 V DC two-core power cable; protective grounding cable; RF jumpers from radio to passive antenna; AISG/RET cable when external antenna control is used; weatherproofing/sealing kit; Known Nokia fiber cable examples: FUFAS 473288A, FUFBB 473304A, FUFBY 473334A, FUFDD 473905A |
| Dimensions | 133 × 447 × 422 mm core; 133 × 492 × 560 mm with covers |
| Weight | 24.5 kg net |
| Operating Temperature | -40 to +55 °C |
| Data / Compatibility Status | Mixed / revision check; Exact family kits confirmed; select FPKA/FPKC by RRH form factor and revision |
|---|---|
| Region | Europe; Asia-Pacific; Middle East; Africa; Latin America |
| Representative Countries | United Kingdom, Germany, France, Italy, Spain, Netherlands, Poland, Sweden, Finland, Turkey, Saudi Arabia, United Arab Emirates, Egypt, South Africa, China, Japan, South Korea, India, Thailand, Malaysia, Indonesia, Australia, New Zealand, Brazil, Chile |
| Battery / Shipping | No internal battery specified; Normally ships without a battery. Verify that no separate Flexi power-battery accessory is included in the shipment |
Frequency compatibility is shown separately from documented deployment or regulatory approval.
Each relation retains its evidence level. Family-level, platform-level and engineering-selection relations are not displayed as exact part-number compatibility.
Target part number(s): 471469A; 472181A; 471402A; 472109A; 083780A; 083833A; 084792A
Interface / role: Flexi baseband/system processing
Conditions: Flexi software release, RAT and CPRI option must match
Target part number(s): 473240A
Interface / role: Outdoor protection / housing
Conditions: Check loaded dimensions, thermal load and cable entry
Target part number(s): 471649A FPKA; 472821A FPKC; 470149A FMFA
Interface / role: Mechanical installation
Conditions: Exact family kits confirmed; select FPKA/FPKC by RRH form factor and revision
Target part number(s): Known cable assemblies: FUFAS 473288A 2 m; FUFBB 473304A 50 m; FUFBY 473334A 50 m; FUFDD 473905A 80 m. Known optics examples: 4807457 and 4807528; verify exact rate/fiber.
Interface / role: CPRI 2.5 / 5 / 10 Gbit/s
Conditions: Optical rate, wavelength, fiber type and budget must match both ends
Target part number(s): 472182A; 472797A; 472311A; 472301A; CS7136001; 472839A; AA24250LFPFA
Interface / role: Capacity, transport, alarm and power functions
Conditions: Select FBBA/FBBC, FTIF, FPFD/FPFH/PFA and FSAH according to site BOM
Target part number(s): External antenna PN selected by band, port count and gain
Interface / role: RF radiation and reception
Conditions: Match band, polarization, port count, connector and PIM rating
Send the manufacturer, model, part number, quantity and destination country. Requests may include equipment not yet listed in the catalog.