02311VFF
Huawei BBU5900 Box 02311VFF. BBU Chassis for the BBU Chassis / Support. Supported standards: GSM, UMTS/WCDMA, LTE/LTE-A, NB-IoT and 5G NR depending on host BBU, boards and software. Compatible radio/AAU families: Huawei RRU3000, RRU5000 and AAU families subject to board, software and port compatibility. Required modules and boards: UMPT control/transmission; UBBP baseband processing; UPEU power entry; UPBA support/alarm; DCDU power distribution; fan unit and synchronization modules. Transport/fronthaul: CPRI/GE/10GE interfaces are provided by the installed UBBP/UMPT boards. Power: -48 V DC via configured power-entry boards. Installation: 19-inch rack or Huawei cabinet. Verification status: Family-level; Standard BBU rack installation.
| Product Type | BBU Chassis |
|---|---|
| Platform / Generation | BBU Chassis / Support |
| Priority | A — launch priority |
| Supported Standards | GSM, UMTS/WCDMA, LTE/LTE-A, NB-IoT and 5G NR depending on host BBU, boards and software |
| Compatible Radio / AAU Families | Huawei RRU3000, RRU5000 and AAU families subject to board, software and port compatibility |
| Required Modules & Boards | UMPT control/transmission; UBBP baseband processing; UPEU power entry; UPBA support/alarm; DCDU power distribution; fan unit and synchronization modules. |
| Compatible Cabinet / Subrack | 19-inch rack or Huawei indoor/outdoor telecom cabinet |
| Transport / Fronthaul Interfaces | CPRI/GE/10GE interfaces are provided by the installed UBBP/UMPT boards |
|---|---|
| Optical Form Factor | eSFP / SFP+ / SFP28 depending on UBBP/UMPT generation |
| Optical Speed / Interface | CPRI/eCPRI and GE/10GE/25GE |
| Optical Connector | LC duplex |
| Optical Reach | 300 m MMF; 10–40 km SMF depending on interface |
| Known Optical Part Numbers | Huawei-approved optics matched to the UBBP/UMPT board and connected RRU/AAU. |
| Power Supply | -48 V DC via configured power-entry boards |
|---|---|
| Power Connector Type | 3V3 or HDEPC connector on the -48 V UPEU port |
| Required Power Cable | Huawei BBU power cable with a mating 3V3 or HDEPC connector |
| Power Consumption | Estimated maximum 350 W |
| Cooling / Airflow | Outdoor enclosure cooling; preserve all heat-sink and airflow clearances |
| Mounting / Rack | 19-inch rack or Huawei cabinet |
| Rack / Form Factor | 19-inch or vendor-specific form factor; verify exact chassis |
| Required Mounting Hardware | Huawei BBU rack-mount ears/rails and cabinet shelf as required |
| Cables & Connections | DC or AC input cable as specified; Ethernet backhaul; CPRI/eCPRI optical fiber to radios; grounding cable; alarm cable; GNSS/coax or PTP/SyncE synchronization connection; console/service cable |
| Synchronization / Management | External alarm: RJ45/dry contacts; synchronization/O&M depends on installed boards |
| Dimensions | 86 × 442 × 310 mm |
| Weight | 12 kg empty |
| Operating Temperature | -5 to +55 °C |
| Data / Compatibility Status | Family-level; Standard BBU rack installation |
|---|---|
| Region | Global / band-neutral |
| Representative Countries | All countries where the compatible vendor platform and connected radio units are deployed |
| Battery Information | No large battery installed in the listed BBU chassis/support item; External Huawei 20 Ah / 50 Ah / 100 Ah lithium battery system; connected through PSU BAT ports |
Frequency compatibility is shown separately from documented deployment or regulatory approval.
Each relation retains its evidence level. Family-level, platform-level and engineering-selection relations are not displayed as exact part-number compatibility.
Target part number(s): Exact rack-kit PN not confirmed
Interface / role: Mechanical hosting
Conditions: Loaded mass, rack depth, cooling and power distribution must be checked
Target part number(s): Huawei-approved optics matched to the UBBP/UMPT board and connected RRU/AAU.
Interface / role: CPRI/eCPRI and GE/10GE/25GE
Conditions: Select optics and fiber for each radio link
Target part number(s): See individual radio part numbers in the category tables
Interface / role: Baseband processing and radio control
Conditions: Hardware generation, RAT, software, licenses and interface speed must match
Send the manufacturer, model, part number, quantity and destination country. Requests may include equipment not yet listed in the catalog.