Home/ Equipment/ Ericsson/ AIR 6449 B43 KRD901203/11

AIR 6449 B43

KRD901203/11

Ericsson AAU & Antennas Exact data recorded
Technical product identity

Ericsson AIR 6449 B43 KRD901203/11

Ericsson AIR 6449 B43 KRD901203/11. Integrated active antenna / AAU for B43 (3700 MHz TDD); 64T64R; output 280 W total. Antenna: Integrated active antenna / Massive MIMO array. Compatible baseband: RAN Processor 65xx/66xx and supported Ericsson Baseband 6630/6648 configurations. Required processing/transport modules: Processing: Baseband/RAN Processor. Transport: CPRI/eCPRI or Ethernet interface. Capacity: licenses and processing capacity. Power: -48 V DC distribution. Synchronization: PTP/SyncE/GNSS as required. Interface boards: determined by RAN Compute generation. Fronthaul: Sealed optical fronthaul ports: CPRI/eCPRI; SFP+/QSFP-class depending on generation. Power: -48 V DC outdoor site supply. Mounting: Pole/tower or Ericsson rail mounting; lifting/hoisting points required. Verification status: Model/item-level where cited; Mounting architecture confirmed; exact KRD bracket BOM requires Ericsson CPI.

Manufacturer
Ericsson
Model
AIR 6449 B43
Part Number
KRD901203/11
Equipment Type
AAU & Antennas
Supported Bands
B43
MIMO / TX-RX
64T64R
Output Power
280 W total
Primary Markets
Europe; Asia-Pacific; Selected Latin America
Last Verified
July 2026

Active Antenna & Radio Configuration

BandB43
Frequency3700 MHz TDD
MIMO / TX-RX Configuration64T64R
Output Power280 W total
Antenna TypeIntegrated active antenna / Massive MIMO array
Supported StandardsLTE / LTE-Advanced / 5G NR; exact modes depend on band variant, licenses and software

System Compatibility

Compatible BBU / BasebandRAN Processor 65xx/66xx and supported Ericsson Baseband 6630/6648 configurations
Required Processing / Transport ModulesProcessing: Baseband/RAN Processor. Transport: CPRI/eCPRI or Ethernet interface. Capacity: licenses and processing capacity. Power: -48 V DC distribution. Synchronization: PTP/SyncE/GNSS as required. Interface boards: determined by RAN Compute generation.
Compatible Cabinet / SubrackPole/tower mounting with Ericsson rail system; external -48 V DC distribution and fiber management

Fronthaul, Optics & Management

Fronthaul InterfaceSealed optical fronthaul ports: CPRI/eCPRI; SFP+/QSFP-class depending on generation
Optical Form FactorSFP+ / SFP28 / QSFP28 by AIR generation
Optical SpeedCPRI/eCPRI 10 / 25 / 100 Gbit/s depending on model
Optical ConnectorLC duplex or MPO for QSFP-class links
Optical ReachTypical 10–20 km SMF
Known Optical Part NumbersEricsson-approved AIR fronthaul optics; exact module PN must match KRD hardware and RAN Compute interface.
Synchronization / ManagementService / maintenance interface; synchronization is normally transported over fronthaul

Power & Structural Installation

Power Supply-48 V DC outdoor site supply
Power Connector TypeHigh-current 2-pole or vendor-specific multipin sealed -48 V DC connector; depends on the AIR generation
Required Power CableEricsson AIR outdoor DC power cable with a factory-installed mating plug
Power ConsumptionEstimated maximum 700 W
Installation EnvironmentOutdoor
Mounting MethodPole/tower or Ericsson rail mounting; lifting/hoisting points required
Mounting Kit / HardwareEricsson AIR model-specific heavy-duty rail/pole bracket and one-bolt interface; exact kit depends on KRD and antenna dimensions
Known Mounting Kit PNsExact mounting-kit PN not confirmed publicly
Fasteners / FixingsHeavy-duty pole clamps/U-bolts or rail clamps, captive bolts, anti-rotation hardware, lifting eye/hoist and safety tether. Structural calculation required for wind load.
Cooling / Thermal SpacingPassive outdoor cooling; selected high-power units require model-specific thermal spacing
Cables & ConnectionseCPRI/CPRI optical fiber; high-current -48 V DC power cable; protective grounding cable; synchronization over fronthaul/PTP; alarm/service cable where specified; no RF jumper to an external passive antenna
Dimensions728 × 485 × 218 mm
Weight45 kg net
Operating Temperature-40 to +55 °C

Identity & Verification

Data / Compatibility StatusModel/item-level where cited; Mounting architecture confirmed; exact KRD bracket BOM requires Ericsson CPI
RegionEurope; Asia-Pacific; Selected Latin America
Representative CountriesUnited Kingdom, Germany, Sweden, Finland, Japan, Australia, Brazil, Argentina
Battery / ShippingNo internal battery specified; Normally ships as equipment without a battery. Check that no separate site-energy accessory is packed with it

Regional Market Compatibility

Frequency compatibility is shown separately from documented deployment or regulatory approval.

Regional application
Europe; Asia-Pacific; Selected Latin America
Matched bands
B43
Representative countries
United Kingdom, Germany, Sweden, Finland, Japan, Australia, Brazil, Argentina
Compatibility status
Exact data recorded
Structured equipment graph

Compatible Equipment & Engineering Relationships

3 relationship rows

Each relation retains its evidence level. Family-level, platform-level and engineering-selection relations are not displayed as exact part-number compatibility.

Compatible BBU/Baseband

RAN Processor 6651; RAN Processor 6641; RAN Processor 6631; RAN Processor 6621; RAN Processor 6655; Baseband 6620; Baseband 6630; Baseband 6648; Baseband 5212; Baseband 5216 Family-level Required

Target part number(s): KDU1370093/11; KDU1370014/11; KDU1370071/11; KDU1370070/11; KDU1370098/11; KDV127620/11; KDV127621/11; KDU137848/11; KDU1370015/11; KDU137925/41; KDU137925/31

Interface / role: High-capacity baseband/eCPRI processing

Conditions: AIR hardware, RAN Compute generation, eCPRI/CPRI and software must match

Mounting accessory

Ericsson AIR model-specific heavy-duty rail/pole bracket and one-bolt interface; exact kit depends on KRD and antenna dimensions Model-specific or family-level Required

Target part number(s): Exact mounting-kit PN not confirmed publicly

Interface / role: Pole/tower structural mounting

Conditions: Wind load, pole diameter and bracket interface must match

Optical connection

SFP+ / SFP28 / QSFP28 by AIR generation Interface-level Required

Target part number(s): Ericsson-approved AIR fronthaul optics; exact module PN must match KRD hardware and RAN Compute interface.

Interface / role: CPRI/eCPRI 10 / 25 / 100 Gbit/s depending on model

Conditions: Match eCPRI/CPRI rate, wavelength and fiber budget

Referenced by Other Equipment

Worldwide telecom sourcing

Can’t find the exact model or configuration?

Send the manufacturer, model, part number, quantity and destination country. Requests may include equipment not yet listed in the catalog.